Sakura Tissue-Tek Glas g2 User Manual

INSTALLATION & SETUP
2.6 Revised 3/30/2010
5. Place the anti-drying bottle and waste container in the
dispensing tray (Figure 2-P). First, push back the
dispensing nozzle in and then place the bottle
(Figures 2-Q, 2-R, & 2-S).
Dispensing nozzle
Dispensing tray
Waste Container Anti-drying
bottle
6. After the anti-drying bottle and waste container have
been placed, lift the dispensing nozzle and return the
nozzle so that its tip enters the hole in the anti-drying
bottle (Figure 2-T).
Dispensing
tray
Waste
container
Anti-drying bottle
Dispensing nozzle
Anti-drying bottle
Figure 2-P
Figure 2-Q
Figure 2-R
Figure 2-T
Figure 2-S

Sakura Tissue-Tek Glas g2 Specifications

General

Brand	Sakura
Model	Tissue-Tek Glas g2
Category	Laboratory Equipment
Language	English