Sakura Tissue-Tek Glas g2 User Manual

OPERATING INSTRUCTIONS
4.18 Revised 3/30/2010
6. Confirm that Yes is selected for Link With
Coverslipper in the System Setup tab (Figure 4-AA).
Figure 4-AA
7. Press the EXIT key to return to the monitor screen.
Figure 4-BB
8. Confirm that the link station (LK) is displayed in the
bottom left-hand corner of the station layout view.
How to Start from the Prisma
1. Press the START key on the monitor screen.
2. When the display switches to the process start screen
(Figure 4-CC), select a staining program and a
coverslipping program. When the program number
setting key is pressed on the coverslipper, the
numeric keypad screen appears (Figure 4-DD). Use
the numeric keypad to enter the program number to
be used by the coverslipper. “0” is entered by default.
If the default setting is used, coverslipping will be
performed according to the conditions currently
displayed on the coverslipper.
Figure 4-CC
Figure 4-DD

Sakura Tissue-Tek Glas g2 Specifications

General

Brand	Sakura
Model	Tissue-Tek Glas g2
Category	Laboratory Equipment
Language	English