If the Reset Button is pressed, the ERT50 230v will behave
in the same way as described above, except that most
previously saved user setting will remain.
Function Factory Default Value
Operation Mode Normal
Room Temperature 24 ºC, updated within 5 seconds
Display Mode Full Screen
Date Format DD/MM/YY
Clock 00:00 (24 hour)
Day Fri 01/01/10
Key Lock Off
Holiday On/Off Off
Program On/Off On
Language English
Timers 0 hours
Heat/Cool Heat
Span 0.5 °C
NSB (setback) On
Frost Protection Off
Output Mode PWM
Valve Protection On
Offset 0 °C
Output Off
LCD Backlight Off
Daylight Saving On
N.B: Please be aware that after a Reset, the ERT50 230v
output relay may turn ON if the room temperature is
lower than the Set Point temperature.
ERT50 230v INSTRUCTION MANUAL
15
To Next Page
Loading...
