ERT50 230v INSTRUCTION MANUAL
2
PRODUCT COMPLIANCE
This product complies with the essential
requirements of the following EC Directives:
•
Electro-Magnetic Compatibility
directive 2004/108/EC
•
Low Voltage Directive 2006/95/EEC
•
EC Marking directive 93/68/EEC
SAFETY INFORMATION
These instructions are applicable to the Salus
Controls model stated on the front cover of this
manual only, and must not be used with any other
make or model.
These instructions are intended to apply in the
United Kingdom only, and should be followed along
with any other statutory obligations.
This accessory must be fitted by a Competent
person, and installation must comply with the
guidance provided in the current editions of BS7671
(IEE Wiring Regulations) and Part ‘P’ of the Building
Regulations. Failure to comply with the
requirements of these publications could lead to
prosecution.
Always isolate the AC Mains supply before
opening or removing the unit from the wall or
wall box.
Please leave these instructions with the end user
where they should be kept in a safe place for future
reference.
To Next Page
Loading...
