TEMPERATURE ZONES:
The ERT50 230v has three pre-programmed temperature
zone settings – the default settings of Heating Mode for
each zone are:
Temperature Zone Setting
Standard 20.0 °C
Comfort 24.0 °C
Reduced 16.0 °C
The settings for each zone can be changed by selecting the
Temperature Zones menu item. Pressing the SELECT key will
access the Temp. Zones setting menu.
Each zone temperature can be changed using the PLUS or
MINUS keys. Pressing the SELECT key will move to the next
zone setting.
The settings for each zone cannot be set lower than 10 °C or
set higher than 35 °C.
After setting the Reduced temperature setting, pressing the
SELECT key will save your choices and exit back to the
previous screen.
ERT50 230v INSTRUCTION MANUAL
31
To Next Page
Loading...
