Change Holiday:
The Holiday function allows the user to decrease the room
temperature down to the ‘Reduced’ temperature for a
programmed period of time. The user has to set the
Holiday period Start and End times.
As normal, change the selected option by using the PLUS
or MINUS keys, and confirm the selection using the
SELECT key.
After changing the minutes part of the End time, you can
save your settings by pressing the SELECT key, or press the
CANCEL key to exit without saving.
The Setback function will still operate in Holiday mode. At
the end of the Holiday period, normal programmed
control will resume.
After saving the Holiday settings, the display will return
to the menu screen. If Holiday is turned On, the full screen
display will show the Holiday function icon.
ERT50 230v INSTRUCTION MANUAL
23
To Next Page
Loading...
