Salus RT510RF - Receiver LED Indicators

Pair the RT510RF and RXRT510
Please make sure that the thermostat and the receiver are paired. In order to do this you can use the Pairing
or the testing procedure. The Testing procedure will allow you to check if the devices are communicating
between them. The Pairing procedure will allow you to set up a communication between them.
Pairing procedure
Note: Turn the receiver off and on again (ON-OFF-ON). The red LED will start flashing.
ON
AUTO
OFF
MANUAL
ON
AUTO
OFF
MANUAL
ON
AUTO
OFF
MANUAL
1
Current day of the program
2
Current time
3
Temperature unit
4
AM/PM
5
Frost Mode ON
6
Holiday Mode ON
7
Temporary/Permanent Override
8
Heating Mode ON
9
Low battery
10
Boost Mode ON
11
Current temperature
12
Current program
1 2
3
4
5 6
7
8
9
10
1112
LCD Functions
08 RT510RF Installation Manual