SAMES KREMLIN FPro G - Initialization of Follow-up in Production; Safety in Production; Use of the FPro G; First Commissioning

39
7.5 Initialization of the follow-up in production
Identify the gun in the material tracking system.
- Set up a preventive maintenance program if necessary.
Refer to (10.110.1Preventive Maintenance Plan).
7.6 Safety in production
Respect the maximum recommended pressures:
- 6 bar max. in the gun.
- 1 bar max. in the GSP cup.
Do not point the gun at yourself or anyone else while spraying
Use an adapted and ATEX-certified conductive air hose.
8 Use of the FPro G
First commissioning
Refer to paragraph: 7 Commissioning