46
10.4 Disassembly/Re-assembly operation
10.4.1 Dismantle the FPro G
Unscrew the projector
Objectives
Procedure to be carried out within the framework of maintenance.
Reminder: Assembly errors
The use of improper replacement or defective parts may result in
hazards to personnel, damage, malfunction or general shutdown of
the equipment.
Intervening staff
Qualified personnel.
Prerequisite
Before cleaning or disassembling any component of the
equipment, it is imperative that:
- To cut off the compressed air supply,
- Decompress the hoses by pulling the trigger.
To Next Page
Loading...
