SLEEP TIMER
After user selects the sleep time option, the display will automatically shut-off without
user intervention.
POWER SAVE
When there are no signals detected by the display, the display will automatically go into
sleep mode until signal is restored. Power save mode /feature works with HDMI/ RGB
and Component input options.
System Adjustment
Explanation of Various System Settings
Explanation of Various Sound Control Settings
Menu System
FREQUENCY RESPONSE
User can choose different level of Frequency Response from 120HZ~12KHZ.
BALANCE
Adjusts the BALANCE level between left and right channels.
SURROUND
This display is equipped with Surround Sound circuitry. Use Surround Sound to simulate
a surround sound effect if you are not using a muti-channel sound setup.
X-BASS
Set On to turn on the subwoofer and set Off to turn off subwoofer.
X-BASS VOL.
Use to adjust subwoofer’s volume.
AUDIO OUTPUT
Set the type of audio output sent from the audio output jacks located in the rear of the
display. When set to VARIABLE, audio output is affected by the display’s internal volume
controls. When set to FIXED, the audio output bypasses the display’s internal audio control
so that function such as subwoofer has no effect.
Press the “Menu” key on the front panel or
remote control. Use “Down” key to select the
SYSTEM option from the menu.
Use “Up/Down” keys to select the option that
you wish to adjust.
Use “Left/Right” keys to change the setting.
After achieving desired setting, press “Exit” key
to close OSD or “Left” key to keep adjusting.
1
2
3
18
To Next Page
Loading...
Need help?
General
