Samson 2469 - 7 Customer Inquiries; 8 Dimensions in MM and Weights

7 Customer inquiries
If malfunctions or defects occur, contact the SAMSON After-sales Service for support.
The addresses of SAMSON AG, its subsidiaries, representatives and service facilities world
-
wide can be found on the Internet at www.samson.de, in a SAMSON product catalog or on the
back of these mounting and operating instructions.
Include the following details when making inquiries:
4
Regulator type and nominal size
4
Model number
4
Threaded or flange connection
4
Upstream and downstream pressures
4
Flow rate in m³/h
4
Has a strainer been installed?
4
Installation drawing
8 Dimensions in mm and weights
Nominal size
DN 15 DN 20 DN 25 DN 32 DN 40 DN 50
Pipe Ø d
21.3 26.8 32.7 42 48 60
Connection R
G ¾ G 1 G 1¼ G 1¾ G 2 G 2½
Width across flats SW
30 36 46 59 65 82
Length L
65 70 75 100 110 130
Height H
32 45
Height H1
245 265 295
Standard version
Welding ends L1
210 234 244 268 294 330
Approx. weight in kg
2.4 2.5 2.7 4.0 6.2 7.0
Special version with threaded ends (male thread)
Length L2
129 144 159 180 196 228
Male thread A
G ½ G ¾ G 1 G 1¼ G 1½ G 2
Approx. weight in kg
2.2 2.3 2.4 5.9 6.4 6.9
Special version with flanges PN 16 or PN 25, or version with flanged body (DN 32, DN 40 and DN 50)
Length L3
130 150 160 180 200 230
Approx. weight in kg
3.6 4.3 4.9 9.1 10.4 11.9
12 EB 3132-2 EN
Customer inquiries