10-2 EB 8039 EN
Decommissioning
Risk of personal injury due to residual pro-
cess medium in the valve.
While working on the valve, residual
medium can ow out of the valve and,
depending on its properties, cause personal
injury, e.g. (chemical) burns.
Î Wear protective clothing, safety gloves,
respiratory protection and eye protec-
tion.
To decommission the control valve for service
work or to remove it from the pipeline, pro-
ceed as follows:
1. Closetheshut-offvalvesupstreamand
downstream of the control valve to stop
theprocessmediumfromowing
through the valve.
2. Completelydrainthepipelinesand
valve.
3. Disconnect and lock the pneumatic air
supplytodepressurizetheactuator.
4. Release any stored energy.
5. If necessary, allow the pipeline and valve
components to cool down or warm up to
the ambient temperature.
WARNING
!
WARNING
!