Need help?Do you have a question about the Samson 3766 and is the answer not in the manual?
General| Brand | Samson |
|---|---|
| Model | 3766 |
| Category | Valve Positioners |
| Language | English |
Details on different product configurations and their corresponding codes.
Specifies performance characteristics, operating limits, and physical properties of the positioner.
Lists optional components and their functionalities, such as limit switches and solenoid valves.
Outlines certifications for hazardous area use, including ATEX, IECEx, CSA, and FM.
Instructions for mounting the positioner directly onto SAMSON Type 3277 actuators.
Procedures for mounting the positioner using NAMUR standards for valve attachment.
Guidance for connecting the positioner to rotary actuators via an intermediate piece.
Describes how to connect air supply and signal lines, including fittings and air quality requirements.
Details wiring procedures, terminal assignments, and safety regulations for electrical installation.
Steps for adjusting the zero, span, and proportional band for accurate valve control.
Instructions on how to reverse the positioner's response to the input signal.
Procedure for setting inductive limit contacts to signal valve end positions or intermediate points.
Steps for calibrating the output signal (4-20 mA) based on valve travel.
Guidelines for maintenance and repair of devices used in hazardous locations, ensuring continued compliance.
Procedures for routine checks, calibration, and ensuring the integrity of intrinsically safe circuits.
To Next Page
