Samson 3766 - Versions and Article Code

EB 8355-1 EN 9
Design and principle of operation
2.1 Versions and article code
Pneumatic positioner Type3766- x x x 0 1 x x x x 1 x 0 x 0
Explosion protection
Without 0 2
II2GExiaIICT6accordingtoATEX
1
CSA/FM intrinsically safe/non incendive 3
Exia/ExnI/IICT6IP65IECExTSAAustralia 6
II3GExnAIIT6acc.toATEX
8
Additional equipment
Without 0
Inductive limit contacts 2x SJ2-SN 2
(Analogpositiontransmitter4to20mA)
1)
6 0 0
3/2-way solenoid valve
Without 0
6VDC 2
12VDC 3
24VDC 4
Pneumatic connections
¼-18NPT 1
ISO228/1-G¼ 2
Electrical connections
Without (no additional equipment or solenoid valve) 0 0 0 0
PlasticcableglandM20x1.5,blue 1 0 0
PlasticcableglandM20x1.5,black 2 0 0
CableglandM20x1.5,nickel-platedbrass 2 1 3
Housing version
Die-cast aluminum 0
CrNiMo steel 2
Temperature range
Standard 0
Low-temperature version
T
min
≥–50°C;optionallimitcontacts,solenoidvalve 2 1 3
Special versions
Without 0 0 0
GOSTExapproval0ExiaIICT8X 1 0 1 0
1)
Available until March 2011
Devicefunctioningonlyasanalogpositiontransmitter:3766-x60000xxx000000