Samson 4708 - Page 15

EB 8546 EN 15
Mounting the supply pressure regulator
Type4708-62xxforType3372Actuator
1. Screw the special nut (5) into the SUPPLY
connecting hole of the actuator.
2. Slide the special hollow screw (6) into the
connection hole of the adapter plate.
3. Insert the O-ring (9). Position the supply
pressure regulator and fasten it to the ac-
tuator using the special screw.
4. Seal the spare connections with stoppers
(4) to prevent dirt from entering the de-
vice.
1
9
5
6
4
1
6
5
9
4
Fig.8: Mounting on Type3372 Actuator