Call History
Section 2E. Call History 73
Making a Call From the Call History
1. Press Start > Call History.
2. Select an entry (number or Contacts name) and
press .
Saving a Phone Number From
Call History
The number of Contacts that can be stored on the
device is determined by the storage capacity. Each
Contacts entry can store up to a total of 10 phone
numbers, and each entry’s name can contain 255
characters.
1. Select a Call History entry and press Save (left
softkey).
2. Select <New Contact> and press .
3. Use the keypad to type in the new entry's first and
last name. The device’s word prediction feature
may try to identify the word being typed.
4. Select a Number type from one of the following
categories (groups):
䡲 Mobile
䡲 Work
䡲 Home
䡲 Work 2
䡲 Home 2
䡲 Company
䡲 Pager
䡲 Car
䡲 Assistant
䡲 Radio
After you have saved the number, the new Contacts
entry is displayed in the alphabetical listing. (See
“Contacts Entry Options” on page 79.)
Note
You cannot make calls from Call History to entries
identified as
No ID or Restricted.
I325.book Page 73 Tuesday, December 11, 2007 11:23 AM
To Next Page
Loading...
