Samsung AM080BXMDGH/EU - Page 89

Troubleshooting
4-58 Samsung Electronics
Starting error (cont.)
Continue Continue
Yes
Did the error occurs?
No
Before change / After change
Error, depending on the situation replace the
Compressor or PCB
■ Compressor applied one ■ Compressor applied two
Restart
Inverter1 - Compressor2
Inverter2 - Compressor1 to the wiring change
Power Off
Power Off and then Restart.
End of Service
Replace Inverter PCB.
Before change After change Measure
Error of No.1 Compressor Error of No.1 Compressor Replace No.1 Compressor
Error of No.1 Compressor Error of No.2 Compressor Replace No.1 Inverter PCB
Error of No.2 Compressor Error of No.2 Compressor Replace No.2 Compressor
Error of No.2 Compressor Error of No.1 Compressor Replace No.2 Inverter PCB
Error of No.1 Compressor Error of No.1 Compressor Replace No.1 Inverter PCB
Error of No.1 Compressor Error of No.2 Compressor Replace No.2 Compressor
Error of No.2 Compressor Error of No.2 Compressor Replace No.1 Inverter PCB
Error of No.2 Compressor Error of No.1 Compressor Replace No.2 Compressor