Samsung AM080BXMDGH/EU - 8-3 How to check the view mode using a tact switch

Samsung Electronics 8-5
8-3 How to check the view mode using a tact switch
■ AM080BXM*GH/EU
K1
K2
K3
K4
■ Installing and setting the option with tact switch and explanation of the functions
Setting the option
(1) Press and hold K2 to enter the option setting. (Only available when the operation is stopped)
- If you enter the option setting, display will show the following.
- Seg 1 and Seg 2 will display the number for selected option.
- Seg 3 and Seg 4 will display the number for set value of the selected option.
(2) If you have entered option setting, you can shortly press the K1 switch to adjust the value of the Seg 1, Seg 2 and select
the desired option. (Refer to pages 54~55 for the Seg number of the function for each option)
Example)

(3) If you have selected desired option, you can shortly press the K2 switch to adjust the value of the Seg 3, Seg 4 and
change the function for the selected option. (Refer to pages 54~55 for the Seg number of the function for each option)
Example)

(4) After selecting the function for options, press and hold the K2 switch for 2 seconds. Edited value of the option will be
saved when entire segments blinks and tracking mode begins.