To Next Page

To Previous Page

142

Playing media content from a PC/mobile device

Approving a PC/mobile device connection

Play photos, videos or music saved on a PC or mobile device.

To play media content from a PC or mobile device on the product, the connection with the PC or mobile device must be approved.

―

The media playback feature is available on any devices that support DLNA DMC. The DLNA DMC feature allows you to search media content and control content

playback from a product after connecting a PC or mobile device to the product.

If using the remote control, press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.

- SOURCE → Source

If using touchscreen control mode, connect an external device. Next, touch and hold on the screen when the product is turned on to display the administrator menu.

Select Source

from the administrator menu. (DB10E-T model only)

- Administrator menu

→

Source

→

Source

Select Network from Source. The Network Device menu appears.

Select Options from the screen, and then select Multimedia Device Settings. A list of devices connected to the product will appear.

Select a device and approve the device connection. Playback is only available on devices that are permitted to connect.

―

Sending a media content playback request from a PC or mobile device displays a prompt asking if connection with the product is permitted. Conveniently connect

the devices using the prompt.

―

For details on how to configure a network, refer to the section Network Settings.

―

Ensure the product and PC are connected to the same network subnet.

All IP addresses are made up of four parts separated by dots.

(E.g. IP address 111.222.333.444) The product should have the same IP address as the PC, except for the fourth part of the address, if they are connected to the same

subnet. (E.g. 111.222.333.***)