50
Changing the Input source
Source
Using the remote control
•
SOURCE
→
Source
Using touchscreen control mode (DB10E-T model only)
•
Administrator menu
→
Source
→
Source
Source
MagicInfo S
To see available options, tap Options at the top right corner of the screen.
-
The displayed image may differ depending on the model.
Source allows you to select a variety of sources and change source device names.
You can display the screen of a source device connected to the product. Select a source from source list to display the screen
of the selected source.
―
If using the remote control, connect an external device and press SOURCE on the remote control to select the device.
―
If using touchscreen control mode, connect an external device. Next, touch and hold on the screen when the product is
turned on to display the administrator menu. Select Source
from the administrator menu.
―
The screen may not display correctly if an incorrect source is selected for the source device you want to convert to.
―
On the Source screen, press TOOLS on the remote control. Alternatively, tap Options at the top right of the screen.
Detailed information on the connected external device is displayed.
Edit Name
Using the remote control
•
SOURCE
→
Source
→
TOOLS
→
Edit Name
→
ENTER
E
Using touchscreen control mode (DB10E-T model only)
•
Administrator menu
→
Source
→
Source
→
Options
→
Edit Name
Customize the name of a connected external device.
―
The list can include the following source devices. Source devices on the list differ depending on the selected source.
PC / Cable STB / Satellite STB / PVR STB / Game / Blu-ray / DVD / VCR / AV Receiver / Camcorder / DVI PC / DVI
Devices / TV / IPTV / HD DVD / DMA
Screen Mirroring HDMI
Options
To Next Page
Loading...
Need help?
General
