37
Using a touchscreen monitor
Chapter 03
Touchscreen monitor
Control a PC by tapping the screen instead of using an input device such as a keyboard or mouse. The
touch screen functions by detecting a minute electric current that runs through your body (capacitive).
Make sure to use the surface of your finger tip when tapping the screen.
•
To control the OSD menu by touch input
―
From the menu screen, select System → Touch Control → Device to Control → Samsung
SMART Signage.
•
To control the screen of a PC connected to the product by touch input
―
From the menu screen, select System → Touch Control → Device to Control → Connected
Source Device.
―
In this mode, the OSD menu on the product can only be controlled by the remote control.
Read below before using the product
•
Take extra care to ensure an electrical substance does not contact the screen. The screen may not
function properly if there is static.
•
Do not press hard on the touch screen with your finger tip. Do not use a sharp object when tapping
the screen. The screen may break or get damaged.
•
Do not tap the screen while wearing a glove, with a dirty finger, or using something sharp such as
your fingernail or a ballpoint pen. The screen may not function properly.
•
Take extra care to ensure the screen does not contact moisture. The touch sensor may not function
properly.
•
Displaying a still image on the screen for an extended period of time may cause after images (screen
degradation) or stains. Switch off the screen when not in use.
Model DB10E-T is only supported.
To Next Page
Loading...
Need help?
General
