Samsung DB10E-TPOE - Configuring the Touchscreen Monitor Settings; Calibrating a Monitor

40
Conguring the touchscreen monitor settings
To properly use the touch function of the product in Windows, go to Tablet PC Settings and calibrate the product.
―
First connect the touchscreen monitor before configuring the following settings.
―
The maximum number of touchscreen monitors that can be connected simultaneously varies, depending on the operating system and graphics card settings.
Calibrating a monitor
Go to Tablet PC Settings using the appropriate method according to the system configuration as shown below.
Accessing via Tablet PC Settings in Windows 7
Go to Control Panel Tablet PC Settings. (Calibrate the product by referring to "Calibration" on page 41.)
―
If Tablet PC Settings is not found in the Control Panel, search for Tablet PC Settings from Search Control Panel.
Accessing via Tablet PC Settings in Windows 8
Go to Settings Control Panel Tablet PC Settings. (Calibrate the product by referring to "Calibration" on page 41.)
―
If Tablet PC Settings is not found in the Control Panel, search for Tablet PC Settings from Search Control Panel.