48
Connection using an HDMI-DVI Cable
After connecting a computer to the product with an HDMI-DVI cable, make sure to configure the settings
as shown below to enable the video and audio from the computer.
•
Picture
→
set each screen mode to Text under Picture Mode
•
System
→
General
→
set HDMI Hot Plug to Off
HDMI IN
Connecting to a Video Device
•
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•
You can connect a video device to the product using a cable.
―
Connecting parts may differ in different products.
―
If using the remote control, connect an external device and press SOURCE on the remote control
to select the device.
―
If using touchscreen control mode, connect an external device. Next, touch and hold on the
screen when the product is turned on to display the administrator menu. Select Source
from
the administrator menu.
Connection Using an HDMI-DVI Cable
―
After connecting a video device to the product with an HDMI-DVI cable, make sure to configure the
settings as shown below to enable the video and audio from the video device.
•
Picture
→
set each screen mode to Text under Picture Mode
•
System
→
General
→
set HDMI Hot Plug to Off
HDMI IN
To Next Page
Loading...
Need help?
General
