Samsung DVM S ECO AM XMDG Series - Setting operational options

51
ENGLISH
K1
K2
K3
K4
Installing and setting the option with tact switch and explanation of the functions
□
Setting the option
(1) Press and hold K2 to enter the option setting. (Only available when the operation is stopped)
- If you enter the option setting, display will show the following.
- Seg 1 and Seg 2 will display the number for selected option.
- Seg 3 and Seg 4 will display the number for set value of the selected option.
(2) If you have entered option setting, you can shortly press the K1 switch to adjust the value of the Seg 1, Seg 2 and select the desired
option. (Refer to pages 52~53 for the Seg number of the function for each option)
Example)

((3) If you have selected desired option, you can shortly press the K2 switch to adjust the value of the Seg 3, Seg 4 and change the
function for the selected option. (Refer to pages 52~53 for the Seg number of the function for each option)
Example)

(4) After selecting the function for options, press and hold the K2 switch for 2 seconds. Edited value of the option will be saved when
entire segments blinks and tracking mode begins.