418
Settings
• Setting "Wi-Fi option password" is required
for using DOCOMO services/cloud via Wi-Fi
connection if Wi-Fi is being used. From the
Home screen,
→ "Settings" → "General"
tab → "docomo service/cloud" → "Wi-Fi
settings for docomo apps" to set up.
• This terminal can detect your location
information without turning on Wi-Fi
function. From the Home screen, tap
→ "Settings" → "Connections" tab → "Wi-Fi"
and tap
→ "Advanced" → Mark "Always
allow scanning".
1
2
• Scan available Wi-Fi networks
automatically and show a list of network
detected.
3
• To connect to a Wi-Fi network protected
by security, enter a password (security
key) and tap "Connect".
Connecting via WPS
Wi-Fi network with "WPS available" shown
can be connected via WPS (Wi-Fi Protected
Setup). On the Wi-Fi network list screen,
→ "WPS push button"/"WPS PIN entry" →
Operate on access point device.
To Next Page
Loading...
