417
Settings
Wi-Fi
You can use Wi-Fi function of this terminal to
connect to wireless access point of your home
or company network. Also, you can connect to
Public wireless LAN service access point to use
mails and Internet.
Wireless LAN and Bluetooth functions on this
terminal use the same frequency band (2.4
GHz). If you use wireless LAN and Bluetooth
function nearly, reception interference may
occur and cause lower communications
speed, noise or connection problem. In these
cases, try the following method:
1. Keep any wireless LAN device or Bluetooth
device 20 m or more away from this
terminal.
2. Use within 20 m, turn o the Bluetooth
device.
• Packet communication are usable when Wi-
Fi function is ON. However, Wi-Fi has priority
when Wi-Fi is being connected. From the
Home screen, tap
→ "Settings" →
"Connections" tab → "Wi-Fi", tap →
"Advanced" → Disconnect Wi-Fi network
with "Auto network switch" marked to
switch
LTE/3G/GPRS network
to connect
network. Note that packet communication
charge occurs if you keep using LTE/3G/
GPRS network after toggling.
To Next Page
Loading...
