Getting started
44
›
Select a wallpaper for the idle screen
1
In Menu mode, select Settings
→
Display and light
→
Wallpaper.
2
Select an image.
3
Select Set.
›
Adjust the brightness of the display
1
In Menu mode, select Settings
→
Display and light.
2
Drag the slider under Brightness to adjust the level of
brightness.
3
Select Set.
The brightness level of the display will aect how
quickly the device consumes battery power.
›
Set up a sound prole
You can change your device's sounds by customizing
the current sound prole or switching to another sound
prole. To set up a prole,
1
In Menu mode, select Settings
→
Sound proles.
2
Select the prole you are using.
3
Customize the sound options for incoming calls,
incoming messages, and other device sounds.
► p. 130
Available sound options vary depending on the
selected prole.
4
Select Set.
To switch to another prole, select the check box next to
the prole and then Set.
S8500_UM_Open.indb 44 9/10/2010 11:47:23 AM