Samsung GT-S8500 - Page 61

Communication
60
3
Customize the parameters for the connection prole.
Option Function
Set name Enter the name for the prole.
Access name Enter the access point name.
Auth type Select an authentication type.
User ID Enter your user name.
Password Enter your password.
Protocol Select a network protocol.
Home URL
Enter the web address of a website
to use as your homepage.
Proxy
address
Enter the address of the proxy
server.
Linger Time
(Sec.)
Enter how long the device will wait
for responses from the network.
Advanced
settings
Customize IP and DNS addresses
and trac class.
4
Select Send to send the message.
• If you decide not to send a message immediately,
you can save it to the draft folder for future use.
• If an error occurs while you are sending a message,
it will be saved in the outbox so you can try to
send it later.
• When a message is sent successfully, it will be
saved in the sentbox.
›
Set up an MMS prole
To send and receive multimedia messages, you must
activate a connection prole for connecting to the MMS
server. In addition to proles that are preset by your service
provider, you can add your own connection prole.
1
In Menu mode, select Settings
→
Connectivity
→
Network
→
Connections
→
Yes.
2
Select Create.
S8500_UM_Open.indb 60 9/10/2010 11:47:25 AM