AdjustingthePictureQuality
The purpose of picture quality adjustment is to remove or reduce picture noise. IFthe noise is not
removed by Fine tuning alone, then do the frequency adjustments to the utmost and fine tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned to the center of screen.
POWER
fo_ f-_ /---%
ANTENNA CHMGR FAVCH WISELINK
<> :-,<_<J......._,,j
CAPTION INFO SLEEP
k J \2 ',J
PMO0_ SMODE STILL PSIZB
OCDCDO
©@©©
OSS_ 0 a_saT
NOTE
_' This feature may change
the width of the image.
If necessary, adjust the
position to center.
Press the SOURCE button to select "PC".
Press the MENU button.
Press the _1or • button to select
"Setup", then press the ENTER
button.
Press the • or • button to select
, "PC", then press the ENTER button.
Press the • or • button to select
Ima e
" g Lock , then press the ENTER
button.
. Press the • or • button to select
"Coarse" or "Fine", then press the
ENTER button.
Press the _1or • button to remove
the picture noise.
Select "Return" by pressing the
• or • button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
English- 103