LabelingtheChannels
Use this feature to assign an easy-to-remember label to analog channels (i.e., "CBS", "ESPN",
"PBS2", CNN02", etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear.
POWER
<_ SOUf_CE
L4_ \ j i_6;
<_J<9)
PRE-CH
<;
ANTENNA CHMGR AVCH WISEHNK
\J \J _ J
:<<7 Y
"\v
CAPTION INFO SLE[P
; k J L.J
_®Oi
PMOD[ SMODE STILL PSlZ[
OsT © R_SF
NOTE
" If you add or delete a
TV channel, the
channe! label (if set)
will also be added or
deleted.
Press the MENU button.
Press the _1or • button to select
"Channel", then press the ENTER
button.
Press the • or • button to select
"Channel Manager", then press the
ENTER button.
Press the • or • button to select
"All", then press the ENTER button.
Press the •/•/_1/•
button to select o
channel, then press the
ENTER button and
option window will
appear.
Press the • or • button
to select "Name", then
press the ENTER button.
Press the • or • button
to select a letter, a
number or o blank.
(Results in this
sequence: A...Z, 0...9,
+, -, ¢,/, blank).
0
Press the _1or • button
to switch to the next
field, which will be
selected. Select a
second letter or digit
by pressing • or •
button, as above.
Repeat the process to select the last three digits.
To erase the assigned new name, press and hold the • or •
button until a blank appears.
When you have finished, press the MENU button.
Select "Return" by pressing the • or • button, then press the
ENTER button to return to the previous menu.
Press the EXIT button to exit. English-51
To Next Page
Loading...
