Connections
ConnectingoCamcorder
The side panel jacks on your TV make it easy to connect a Camcorder to your TV.
You can use your camcorder to view tapes without using a VCR.
Locate the A/V output jacks
on the camcorder. They are
usually found on the side or
back of the camcorder.
Connect a video or S-Video
cable between the VIDEO IN
(or S-VIDEO IN) jack on
the TV and the VIDEO (or
S-VIDEO) output jack on the
Camcorder.
The audio-video cables shown
here are usually included with
a Camcorder. (If not, check
your local electronics store.)
If your Camcorder is stereo,
you need to connect a set of
two cables.
Connect a set of audio
cables between the AUDIO
IN jacks on the TV and the
AUDIO output jacks on the
camcorder. If you have a
mono Camcorder, connect
L(mono) to the Camcorder
audio out using only one
audio cable.
0
Camcorder
OutputJacks
TV Rear and right side
Camcorcler
English- 20
To Next Page
Loading...
