ureControl
PictureControl
You can select the type of picture which best corresponds to your viewing requirements.
I_A_&_jIZy_F_J
POWER
f(_x SOURC[
$APASUNG
Changing1thePictureStandard
Press the MENU button.
Press the _1or • button to select
"Picture", then press the ENTER
button.
Press the • or • button to select
"Mode", then press the ENTER
button.
Press the • or • button again to
select (Picture) "Mode", then press
the ENTER button.
Press the • or • button to select the
desired picture mode (Dynamic,
Standard, Movie, Custom), then
press the ENTER button.
Select "Return" by pressing the
• or • button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
Alternatemethod
Press the P.MODE button on the
remote control repeatedly to select
the desired picture mode.
English- 56
* Choose "Dynamic" for viewing the TV during the day or when
there is a bright light in the room.
" Choose "Standard" for the standard factory settings.
" Choose "Movie" when viewing the movie.
" Choose "Custom" if you want to adjust the settings according to
personal preference (see "Customizing the Picture Settings",
page 57).
To Next Page
Loading...
