ConnectingoDTVSet-TopBox
ConnectingtoY,PB,Pe
Connect a set of Component
cables between the
COMPONENT (1 or 2) VIDEO
(% PB,PR)IN jacks on the TV
and VIDEO (Y/PB/PR or
Y/CB/CR) OUT jacks on the
Set-Top Box.
Connect a set of audio cables
between the COMPONENT (1
or 2) AUDIO (L, R) IN jacks on
the IV and the AUDIO OUT
jacks on the Set-Top Box.
NOTE Incoming
• Please be sure to match the Cable or
color coded input terminals Antenna
and cable jacks.
TV Rear Panel
ConnectingtoDVI(DigitalVisualInterface)
Connect an HDMI/DVI cable
between the HDMI IN ]/DVI
IN jack on the IV and the DVI
OUT jack on the Set-Top Box.
2
Connect a set of audio cables
between the DVI AUDIO (L, R)
IN jacks on the TV and the
AUDIO OUT jacks on the
Set-Top Box.
NOTES
• Requires a Cable Converter.
• Make sure the HDMI/DVI source's
power is on, or you will be unable to
select it in the TV menu's source lisL
• The HDMI IN I/DVI IN jack
is not compatible with PC.
Incoming
Cable or
Antenna
DTV Set-Top Box
TV Rear Panel
DTV Set-Top Box
English- 23
To Next Page
Loading...
