Samsung HL-S5687W - Setting the Blue Screen Mode

SettingtheBlueScreenMode
If no signal is being received or the signal is very weak, a blue screen automatically replaces
the noisy picture background. If you wish to continue viewing the poor picture, you must set the
"Blue Screen" mode to "OFf".
iCAB"E!iVCRi
POWER
_,_ SOURCE
,-'4_ F_ J ._
k; _s) ,,6;
_8;k9;
PRE-CH
f--\ -
k;
ANTENNA CHMGR AVCH WISELINK
\ J _J
CAPTION INFO SLEEP
PMOOE SMODE
© S_T © R_sFr
$flr_$uNG
Press the MENU button.
Press the _1or • button to select
"Setup", then press the ENTER
button.
Press the • or • button to select
"Blue Screen", then press the ENTER
button.
Press the • or • Button to select
"Off" or "On", then press the ENTER
button.
Select "Return" by pressing the
• or • button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
English- 67