WISELINK
UsingthePHOTO(JPEG)List
This menu shows JPEG files and folders saved on an MSC memory device.
(Dw: _]
POWER
k1) @ :"
. <a;
<.;\2
pRE-CH
RSW STOP PI^Y/_AUSEFF
" vo 7 - CH
CAPTION INFO SLEEP
_@_@PMODESMODE PSlZE
©@©©
© sF © aES_T
S_MSUN8
English- 112
Complete Steps 1 to 4 of Using the WISELINK Menu.
(Refer to page 111)
Press the _1or • button to
move to "Photo", then press
the ENTER button.
The saved file information is
displayed as a folder or file.
Press the A, V, _1and •
buttons to select a file, then
press the ENTER button.
• Pressing the button over
a photo icon shows the
currently selected photo
in full screen.
• Pressing the button over
a folder icon shows the
JPEG files included in
the folder.
: : folder icon
_: photo icon
/_: Move to the previous
folder stage icon
To exit WISELINK mode,
press the WISE LINK button
on the remote control.
NOTES
• Moving to a photo may take a few seconds to load the file.
At this point, the icon will appear at the top left of the
screen.
• This menu only shows files whose file extension is jpg. Files of
other formats such as bmp or tiff will not be displayed.
• The files are displayed on a page. 15 thumbnailphotos are
displayed per page.
• The thumbnails are numbered from left to right and from tap to
bottom, from 1 to 15.
• Folders are displayed first and they are fallowed by alIJPEG files
in the current folder. The folders and JPEG files are sorted in
alphabetical order.
• If the photo is displayed in full screen, you can zoom in and out
or rotate the photo on the screen. (Refer to pages 116~ I 18)
• It takes time to showJPEG files as Thumbnail images.
To Next Page
Loading...
