Samsung HL-S5687W - Viewing an External Signal Source; Selecting Signal Source via Menu

ViewinganExternalSignalSource
Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable).
POWER
ao
oo°o°
<2/<3;
\ f _
PRE-CH
/ _ /_ / \
\,J<gJ<;
AN]ENNA CHMGR [AVCH WIS_LINK
\; <)
/LL\, <r
_m_, /
CAPTION INFO SLE[P
kj
£MOD£ SMODE STILL PSIZ[
C9 C9 C9 C9
OSET Oa_SET
$flMSUNB
Settin9theSignalSource
Press the MENU button.
Press the ENTER button to select
"Input".
Pressthe • or • button to select
"Source List", then press the ENTER
button.
Press the • or • button to select a
signal source, then press the ENTER
button.
" When you connect equipment to
the TV, you can choose between
the following sets of jacks:
"AV 1", "AV2", "S-VIDEO 1",
"S-VIDEO2", "COMPONENT1 ", "COMPONENT2", "PC",
"HDMI1 ", or "HDMI2" on the TV's rear panel and "AV3" on
the TV's side panel.
Alternatemethod
Press the SOURCE button on the
remote control repeatedly to
select an external signal source.
NOTES
" Only connected devices can be selected.
" Before selecting an input source, make sure the corresponding
external device is connected first.
" HDMI input can be selected only when the external device is
turned on and connected to the
English- 45