SettingtheOn/OffTimer
POWER
9°:
ANTENNA CHMGR FAVCH WISELINK
,,j,, ()
PM©DE SMODE STILL PSIZE
NOTE
• Auto Power Off
When you set the timer
"On", the television will
eventually turn off, if no
controls are operated for
3 hours after the TV was
turned on by the timer.
This function is only
available in timer "On"
mode and prevents
overheating, which may
occur if a TV is on for too
long (when you are on
vacation, for example).
Press the MENU button.
Press the _1or • button to select
"Setup", then press the ENTER
button.
Press the • or • button to select
"Timer", then press the ENTER button.
Press the • or • button to select
"On Timer", then press the ENTER
button.
Press the • or • button to adjust
"Hour/Minute", then press the
• button to move to the next step.
Set other items using the same
method as above.
To activate On Timer with the setting
entered, set Options to "Once, Daily,
Mon~Fri, or Mon~Sat" by pressing
• or • button. Press the ENTER
button.
• You can set the hour, minute,
and channel directly by pressing
the number buttons on the
remote control.
Press the • or • button to select
"Off Timer", then press the ENTER
button.
Press the • or • button to adjust
"Hour/Minute", then press the •
button to move to the next step.
Set other items using the same
method as above.
To activate Off Timer with the setting
entered, set Options to "Once, Daily,
Mon~Fri, or Mon~Sat" by pressing
• or • button. Pressthe ENTERbutton.
When finished, select "Return" by pressing • or • button and
ENTER button to return to the previous menu.
Press the EXIT button to exit. English- 43
To Next Page
Loading...
