Customizingthe PictureSettings
You can use the on-screen menus to change the "Contrast", "Brightness", "Sharpness", "Color",
"Tint", and "Color Tone" according to personal preference. You can select "Standard" which
automatically recalls your personalized picture settings.
LVCR
POWER
<'J<=)<!)
PR-O
\)
ANTENNA CHMGR FAVCH WlSELINK
< < ) < ) < )
CAPTION INFO SLEfP
d \ / ",
kJ <)
PMODE i Mille SilL/ P/IZ£
NOTES
• "Tint" doesn't operate in
HDMI, PC or Component
modes.
" The Tint cannot be
adjusted while watching
Digital TV.
" In PC mode, the Contrast
and Brightness can be
selected.
iii
Press the MENU button.
Press the _1or • button to select
"Picture", then press the ENTER
button.
Press the • or • button to select
"Mode", then press the ENTER
button.
Press the • or • button again to
select (Picture) "Mode", then press
the ENTER button.
Press the • or • button to select the
desired picture mode (Dynamic,
Standard, Movie, Custom), then
press the ENTER button.
Press the • or • button to select
a particular option (Contrast,
Brightness, Sharpness, Color, or
Tint), then press the ENTER button.
Press the _1or • button to decrease
or increase the value of a particular
item.
While adjusting a picture
option, you can also select
another option (Contrast,
Brightness, Sharpness,
Color, or Tint) by pressing
the • or • button.
Continued...
Eng lish- 5 7 iii7,,Iiiiiiiiiiiiiiiiiiii
To Next Page
Loading...
