Samsung HL-S5687W - Page 58

ureControl
Press the ENTER button to return to "Mode".
Press the • or • button to select "Color Tone", then press the
ENTER button.
Press the • or • button to select a particular item (Cool2, Coo11,
Normal, Warm1, or Warm2), then press the ENTER button.
Select "Return" by pressing the • or • button, then press the ENTER
button to return to the previous menu.
ResettingthePictureSettingstotheFactoryDefaults
J'
To return the factory defaults, select "Reset" by pressing the • or •
button. Press the ENTER button.
Press the • or • button to select "OK" or "Cancel", then press the
ENTER button.
Select "Return" by pressing the • or • button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
• If you set "Reset" to "OK", the previously adjusted settings will
be reset to the factory defaults.
NOTE
• The reset function must be set separately for each mode (Dynamic, Standard, Movie, or Custom).
:,_ Eng lish- 58