WISELINK
POWER
° <j
PRE-CH
$_MSUNG
R0tatin9
Complete Steps 1 to 4 of Using the WlSEUNK Menu.
(Refer to page 1] ] )
Press the _1or • button to
move to "Photo", then press
the ENTER button.
The saved file information is
displayed as a folder or file.
Press the •, •, _1and •
buttons to select a file, then
press the ENTER button.
Pressing the button over a
photo thumbnail displays the
photo in full screen.
Press the INFO button to
display the option(Slide
Show, Rotate, Zoom).
Press the • or • button to
select "Rotate", then press
the ENTER button.
• The INFO button, the Rotate option and Enter must be
pressed each time you want to rotate the picture.
For example, from 90 to 180 degrees.
To rotate a photo, press the INFO button to open the options
window, select the "Rotate" option and press the ENTER
button. Whenever you do this, the photo on the screen is
rotated. (90 °, 180 °, 270 °, 0 °)
To exit WlSELINK mode,
press the WISE LINK button
on the remote control.
English- 116
NOTES
• The rotated file is not saved.
" Zoom/Slide Show option is disabled when the Rotate option is
sebcted.
To Next Page
Loading...
