"Forreplacement,youwillneeda5.91-Inchscrewdriverandapairofgloves.
Unplug TV, then use a
screwdriver to remove the
screws.
Remove the Lamp cover.
Remove the Lamp cover duct
holding the tab and pulling
it out.
Remove the screw securing
the Lamp by using a
screwdriver.
Separate the Lamp from the
_ engine by holding the handle
and pulling it out.
NOTES
" Be sure the replacement Lamp is the same type.
• After replacing the lamp, align the lamp cover with the groove and secure the screws.
• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective
circuit).
English- 125
To Next Page
Loading...
