Samsung iDCS 16 - Program System Speed Dial Names

18
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press Transfer and then dial 705 SYS SPEED DIAL
Display shows the first number 5
00:
2. Dial the speed bin desired (e.g., 505) OR SYS SPEED DIAL
press UP or DOWN to choose and 5
05:
press the right soft key to move the cursor
3. Enter the access code (e.g., 9—the system SYS SPEED DIAL
will automatically insert a dash) followed by 505:9–121223456789
the phone number (up to 24 digits long)
and press the right soft key to return to
step 2
4. Press the F key to toggle to Program SYS SPEED NAME
System Speed Dial Names, step 3 to 505:
enter the name
5. Press Transfer to store and exit
programming OR press Speaker to store
and advance to the next program
DEFAULT DATA: NO SPEED NUMBERS ASSIGNED
iDCS_16sys_adm.qxd 12/14/2004 4:27 PM Page 23
19
PROGRAM SYSTEM SPEED DIAL
NAMES
This program is used to assign a character name or identification for each
system speed dial location. This name enables you to locate the speed dial
number when you are using the directory dial feature. You may assign a
name 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll through speed dial bins.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
Speaker - Used to store data and advance to next program.
Hold - Used to clear previous entry.
ACTION DISPLAY
1. Press Transfer and then 706 SYS SPEED NAME
Display shows the first name 5
00:
2. Dial the system speed number (e.g., 505) SYS SPEED NAME
OR press UP or DOWN to select the entry 5
05:
number and press the right soft key to
move the cursor
3. Enter the name as shown in Program SYS SPEED NAME
Station Names and press the right soft 5
05:SAMSUNG
key to return to step 2 OR press the
F key to toggle to the speed dial number
to return to Program System Speed Dial
Numbers, step 4
4. Press the right soft key to return to step 2
above OR press Transfer to store and exit
programming OR press Speaker to store and
advance to the next program
iDCS_16sys_adm.qxd 12/14/2004 4:27 PM Page 24