Samsung iDCS 16 - Transferring Calls; Transfer with Camp-On; Call Waiting; Setting Up a Conference

12
RESET STATION PASSCODES
TO DEFAULT
Individual keyset users can set or change their own individual passcodes.
These passcodes are used to lock and unlock keysets, override toll restric-
tion and access the DISA feature. At times, it may be necessary for the sys-
tem administrator to reset a station’s passcode to default “1234.” This pro-
gram cannot be used to display passcodes, only to reset them.
PROGRAM KEYS
UP & DOWN - Select the extension number.
Hold - Press to reset the passcode.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press Transfer and then dial 101 [201
] PASSCODE
Display shows PASSCODE:4444
2. Dial the station number OR use the [205] PASSCODE
UP and DOWN keys to scroll through PASSCODE:4444
the keyset numbers and press the
right soft key to move the cursor right
3. Press Hold to reset the passcode [205] PASSCODE
PASSCODE : 1234
4. Press the right soft key to return to
step 2 OR press Transfer to store and exit
programming OR press Speaker to
store and advance to the next program
DEFAULT DATA: ALL STATION PASSCODES = 1234
iDCS_16sys_adm.qxd 12/14/2004 4:27 PM Page 17
13
PROGRAM STATION NAMES
This program is used to assign a character name or identification for each
extension. You may assign a name of 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
Hold - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press Transfer and then dial 104 [2
01] STN NAME
Display shows
2. Dial station number (e.g., 205) [205] STN NAME
OR press UP or DOWN to select the
station and press the right soft key to
move the cursor
3. Enter the station name using the [205] STN NAME
procedure described on the next page SAM SMITH
and press the right soft key to return to
step 2
4. Press Transfer to store and exit
programming OR press Speaker to store
and advance to the next program
NOTE: Directory information is always 11 characters.
DEFAULT DATA: NONE
iDCS_16sys_adm.qxd 12/14/2004 4:27 PM Page 18