26
5. Enter the alarm type from the list above [205]ALM REM (2)
OR press UP or DOWN to select the HHMM:1300DAILY
alarm type and press the right soft key
to move the cursor
6. Enter the messages using the procedure [205]ALM REM (2)
in Program Station Names and press the TAKE MEDICATION
right soft key to return to step 2
7. Press Transfer to store and exit pro-
gramming OR press Speaker to store
and advance to the next program
iDCS_16sys_adm.qxd 12/14/2004 4:27 PM Page 31
27
MANAGING KEY ASSIGNMENTS
You can view station key assignments and add extenders to some of the pro-
grammable keys for easy one touch operation of frequently used features.
An extender is a number that makes an otherwise general key very specific.
Adding the digit “4” to a PAGE key defines this key for paging zone four.
Adding “205” to a directed pickup key will define this key as pickup for ex-
tension 205 only. The key must already be assigned by the installing techni-
cian.
Use this program to assign extenders to the following keys:
KEY DESCRIPTION EXTENDER
BOSS ........Boss/Secretary ....................(1–4)
DP ..............Direct Pickup ......................(Extension number or
station group number)
DS ..............Direct Station ......................(Any extension number)
FWRD ........Call Forwarding ..................(0–7)
GPIK ..........Group Pick-Up ....................(01–08)
IG ..............In/Out of Group ..................(500–509)
MMPG........Meet Me Page ....................(0–9, 4)
PAGE ........Page ....................................(0–9, 4)
SPD............Speed Dialing ......................(00–49, 500–799)
PMSG ........Programmed Messages ....(01–20)
DIR ............Directory ..............................SYS (0), PERS (1) or STN (2)
PROGRAM KEYS
UP & DOWN - Select the extension number.
KEYPAD - Used to enter extender codes.
Hold - Used to clear the displayed data.
iDCS_16sys_adm.qxd 12/14/2004 4:27 PM Page 32
To Next Page
Loading...
