30
SETTING INDIVIDUAL FORWARD NO
ANSWER TIMERS
Each station can have an individual Call Forward No Answer timer to accom-
modate station users with different individual work habits. When adjusting
this timer, take care that the value is not greater than the transfer recall timer.
The range is 001-255 seconds.
PROGRAM KEYS
KEYPAD - Used to set timer values.
UP & DOWN - Used to select extension number.
Speaker - Save data and advance to next program.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 502 [2
01] NO ANS FWD
Display shows 010 SEC
2. Dial the station number (e.g., 205) OR [205] N
O ANS FWD
press UP or DOWN key to select the 010 SEC
station and press the right soft key OR OR
press Redial to select all stations [ALL] N
O ANS FWD
and press the right soft key 010 SEC
3. Enter the new value via the dial pad, [205] NO ANS FWD
(e.g. 020), must be 3 digits) and the 010 SEC→020
system will return to step 2
4. Press Transfer to store and exit
programming OR press Speaker to store
and advance to the next program
iDCS_16sys_adm.qxd 12/14/2004 4:27 PM Page 35
ADDING NAMES TO THE
TRANSLATION TABLE
This program allows the system administrator or technician to associate a
CID number received from the Central Office with a name programmed in
this translation table. If there is no match between a received number and a
name in this table, [no CID name] will be displayed. The translation table
consists of 200 entries with each entry comprised of a 12 digit telephone
number and a 16 digit name. See Program Station Names.
Open customer programming and follow the instructions below.
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next MMC.
Hold - Used to clear previous entry.
ACTION DISPLAY
1. Press Transfer and then dial 728 CID XLAT:(001
)
Display shows first entry DIGIT:
2. Dial entry number (e.g., 005) CID XLAT:(005)
OR use UP and DOWN to scroll DIGIT:_
through entries and press right
soft key to select entry
3. Enter telephone number and press CID XLAT:(005)
right soft key to advance to name entry DIGIT:3054264100
OR enter telephone number and press
left soft key to return to step 2 above
4. Enter the name using the method CID XLAT:(005)
in Program Station Names SAMSUNG TELECOM
and press right or left soft key to
return to step 2 above
OR
press Speaker to save and advance
to next MMC
OR press Transfer to
save and exit programming
DEFAULT DATA: NONE
31
iDCS_16sys_adm.qxd 12/14/2004 4:27 PM Page 36
To Previous Page
Loading...
