LED R&D Lab(VD)
103
2-1. IER + IER-F Extension (Left to Right)
• Use the JIG F when installing the IER-F (“F”) left to right on the installed IER Frame.
• Fasten an IER Frame Side and two Frame Fs on the JIG.
• Align the Stud of JIG with the JIG hole of the Frame, and then fasten the JIG screws.
*Be sure to check the hole locations – IER: 270 mm / IER-F: 240 mm
• Fasten the Frame F to the wall with screws.
Fig 7. Shape of Mounted JIG F
Fig 8. IER-F Installed to the Left of IER
Hole for screw
IER
①
F
F FRAME
IER
FRAME
JIG SCREW
To Next Page
Loading...
