LED R&D Lab(VD)
29
a
a
b
b
c
b
d
4. Frame Installation
② On the left end, place the ⓐBracket Side and fasten the screws to install the Bracket (Fig.3).
※ Fasten one screw first, and use a clinometer to vertically align the right edges and fasten screws into the other holes.
(See the next page for precautions when fastening screws.)
Fasten the screws in the order of screw 1 → screw 2 → screw 3. Fig.1
ⓐ Fix the Bracket Side, following the measurements shown in Fig.4.
Fig.1 Order of fastening the screws
Fig.3 Positions of
components to attach
Fig.4 Screw fastening position
based on screen
12 mm or above
25 mm or above
12 mm or above
a
Fig.2 Screwing hole
Screwing
hole
①
③
③
②
To Next Page
Loading...
