LED R&D Lab(VD)
119
• After IER + IER-F Cabinet installation, fasten the Cover PCB to the outermost edge to fix the Module.
• You can fasten two Cover PCBs on the horizontal side and a Cover PCB on the vertical side based on a module.
• IER-Fs have different Cover PCBs on the horizontal and vertical sides, and the horizontal Cover PCB can be used together with IER.
Cover PCB
(included in the IER
Common/Set)
Cover PCB (included in
IER-F Only/Set)
Fig 1. Cover PCB for each IER-F Position
Fig 2. Cover PCB Fastening Positions Example for IER+IER-F Installation
4. Fastening the Cover PCB
To Next Page
Loading...
