LED R&D Lab(VD)
115
3. [PIVOT] IER + IER-F Extension
• When installing the IER Pivot, install the Cabinet by turning it clockwise (from Front view).
→ Install it by turning the arrow on the rear to be upward.
• For installation of IER-F, use the Frame F Pivot (VG-LFR11PWF) and JIG F Pivot (CY-LJRNPF).
• The Studs for Case 1, 2, and 3, are different.
Fig 1. IER-F Pivot Extension Case
Fig 4. JIG F Pivot Stud Positions for each Case
Case ③ Installation
Case ② Installation
Case ① Installation (Default)
Fig 3. Pivot Arrow on the Rear
IER-F
①
②
③
IER-F
IER
IER-F
To Next Page
Loading...
