LED R&D Lab(VD)
56
6. S-Box Installation and Connection
• S-BOX Connection (Panel configuration)
⑤ Picture menu setting
• When using S-Box grouping, you must set Picture mode to Calibration. Calibration mode deactivates Contrast Enhancer,
Black Tone, Auto Motion plus function so that there is no screen difference between S-Box.
• In addition, change the option in other picture modes as follows table.
SBB-SNOWJAU / SBB-SNOWJMU
Picture Setting Option
Picture Mode
Picture Mode Calibration
Advanced Settings Picture Enhancer Off
LED Picture Size Output Resolution UHD
LED HDR
Inverse Tone Mapping Off
Dynamic Peaking Off*
Off
Color Mapping Off
Picture Option Color Tone Off
If Multi link HDR is used, the Dynamic Peaking must turn “On”.
To Next Page
Loading...
